Plate And Frame Heat Exchanger

Introduction Plate and frame heat exchanger has been commonly used in many industries. In Europe, the United States, South Africa and India, many sugar applique the plate heat exchanger in the clear juice heating, percolation method of thin juice...

 Click for details

Sanitary Plate Heat Exchanger, built for water heat exchange, or food grade water heating, belongs to one type of plate and frame heat exchanger. Cold water is heated to requested temperature, say 50-60C, by introducing steam or hot water as the...

 Click for details

Heat Exchanger For Milk Pasteurization exists in food industry mostly, and offers customized solution in the heating/cooling of beverage like milk, juice, wort, etc. Owing to its food grade plate design, plate heat exchanger is deemed safe and...

 Click for details

The detachable plate heat exchanger is a kind of plate heat exchanger. It is made up of a lot of heat exchange plates (stamped metal sheets with corrugated grooves), sealed by rubber gaskets with a certain spacing, and compressed with clamping...

 Click for details

A plate heat exchanger is an energy-saving device that transfers heat through metal plates between two or more fluids at different temperatures. It transfers heat from a fluid with a higher temperature to a fluid with a lower temperature, so that...

 Click for details

Water to Water Plate and Frame Heat Exchanger, (or Removable Plate Heat Exchanger as in literal translation from Chinese), is highly popular among process industry. We use it for milk processing, drink processing, and all sorts of dairy fluids...

 Click for details

Model No. : SS304

Application Marine aquaculture is very popular in coastal areas, but since the nursery process requires extremely high water temperature, if the water temperature fluctuates too much, it will cause the survival rate of the fry to drop, thus causing...

 Click for details

Plate and Frame Heat Exchanger in Alcohol industry (1) Cooling of lees centrifugal solution. Alcohol lees centrifugal liquid is discharged from the bottom of the crude distillation tower after separation of the clear liquid, the temperature is 80 ~...

 Click for details

Nitrogen Grid Plate Heat Exchanger For heat exchange between Nitrogen Grids, we have one side at -90C, and the other side at 27C. After putting these two fluids into our exchanger, the hot side will be cooled down to -80C, and meanwhile, cold side,...

 Click for details

Removable Air-Liquid SS Plate Heat Exchanger Introduction The water-liquid plate heat exchanger, mainly using high-temperature water to heat low-temperature water through a series of corrugated metal plates stacked heat exchanger, through the...

 Click for details

Three-in-One Plate and Frame Type Heat Exchanger For pasteurization in food and beverage industry, there are numerous heating and cooling to be done. To simplify the procedure and make it cost-saving, we introduce a new type heat exchanger-the...

 Click for details

Plate Type Heat Exchanger for Pharmacy In the pharmaceutical industry, plate type heat exchanger has always dominated production and use due to their high heat exchange efficiency, easy disassembly, and easy cleaning. It has been widely applied by...

 Click for details

Phe Plate Heat Exchanger for Waste Heat Recovery Under the proposal of reducing carbon emission, non-renewable resource is giving way to clean energy such as sunlight, wind, and other natural resources alike. However, there’s still a long way to go...

 Click for details

PHE Condenser for Milk or Vegetable Oil Cooling Cooking oil, special and indispensable ingredients of our daily diet, requires strict procedure during its production, among which JIEMA PHE Condenser for Milk or Vegetable Oil Cooling earns its name...

 Click for details

Gasketed Plate Heat Exchanger for Food Industry Pasteuring JIEMA Gasketed Plate Heat Exchanger for Pasteuring in Food Industry contributes its social cachet to its characteristics of being easily assembled and highly efficient. From thin metal...

 Click for details

Plate and Frame Heat Exchanger for Heating Featuring with its characteristics of being compact and easy to assemble, JIEMA Plate and Frame Heat Exchanger, also known as gasket heat exchanger, is manufactured by pressing thin metal sheets into...

 Click for details

Titanium Plate and Frame Exchanger Among recent years, titanium is hailed as one of the environment-friendly materials. Expensive as it is, it has great resistance performance and can reduce energy consumption. Jiema Titanium Plate and Frame...

 Click for details

PHE Type Heat Exchanger for Swimming Pool Heating JIEMA PHE TYPE HEAT EXCHANGER FOR SWIMMING POOL HEATING is one-of-a-kind heating device that cope well with its mission concerning the heating of a giant swimming pool. Application Our phe type heat...

 Click for details